MiravoWater Treatment
Run a municipal water treatment plant with duty and standby pumps, tank levels, wear and faults, served over MQTT, OPC UA and Modbus TCP.
A small municipal water treatment plant with intake, treatment, clarification and clean-water distribution.
Asset ages are mixed: the duty raw-water pump at 6,000 hours, the standby intake pump at 2,000, the aeration blower at 4,500 and the mixer motor at 5,000. The template runs at 30x speed, so wear and level changes show up sooner.
Protocol scopes are set per area, line and asset. Intake, aeration and mixing are served over OPC UA, the clarifier and distribution pumps over Modbus TCP, and the dosing pump and clear well over MQTT.
What's running
| Area | Assets |
|---|---|
| Intake | Raw-water pumps, holding tank |
| Treatment | Aeration blower, dosing pump, mixer motor, clarifier pump, clarifier basin |
| Distribution | Clear well, two distribution pumps |
Use cases
- Duty and standby pump monitoring.
- Level and flow balance across multiple process stages.
- Municipal water demos without a custom build.
- Aging intake equipment alongside newer distribution pumps.
Launch
Console ⭢ Catalog ⭢ Water Treatment ⭢ Launch. No restart required.
Verified
In Catalog, Water Treatment shows 11 assets and 4 models. The Assets page keeps updating after launch.
Next
Connect a protocol
Hook a downstream system to the running factory.
Map into Litmus Edge
Map this template into Litmus Edge.
Was this page useful?
Last updated on