MiravoWater Treatment
Run a municipal water treatment plant with redundant pumps, tank levels, process flow, runtime health, faults, and protocol telemetry.
A small municipal water treatment plant. Intake, treatment, clarification, and clean-water distribution.
Mixed asset ages across the flow path: duty raw-water pump at 6,000 hours, standby intake pump at 2,000, aeration blower at 4,500, mixer motor at 5,000. Runs faster than wall clock, so duty-standby patterns, wear, and level changes show up sooner.
What's running
| Area | Assets |
|---|---|
| Intake | Raw-water pumps, holding tank |
| Treatment | Aeration blower, dosing pump, mixer motor, clarifier pump, clarifier basin |
| Distribution | Clear well, high-head pumps |
Use cases
- Duty and standby pump monitoring.
- Level and flow balance across multiple process stages.
- Utility and municipal water demos without a custom build.
- Aging intake equipment alongside newer distribution pumps.
Launch
Console ⭢ Catalog ⭢ Water Treatment ⭢ Launch. No restart required.
Verified
In Catalog, Water Treatment shows the active instances and models. Fleet view keeps updating after launch.
Next
Connect a protocol
Hook a downstream system to the running environment.
Map into Litmus Edge
Map this environment into Litmus Edge.
Was this page useful?
Last updated on
Smart Factory
Run Miravo's default discrete manufacturing line with motors, conveyors, pumps, faults, runtime tags, and MQTT, OPC UA, or Modbus output.
Commercial Building
Run a three-floor office tower with HVAC, central plant, emergency power, live tags, fault behavior, and protocol output for client testing.